Pride Pursuit XL Скачать руководство пользователя страница 17

17

Pursuit XL                                       www.pridemobility.com 

I I .   S A F E T Y

MOTOR VEHICLE TRANSPORT

Pride recommends that you do not remain seated in your scooter while traveling in a motor vehicle. The
scooter should be stowed in the trunk of a car or in the back of a truck or van with the batteries removed
and properly secured. In addition, all removable scooter parts, including the armrests, seat, and shroud
should be removed and/or properly secured during motor vehicle transport. 

WARNING! Although your scooter may be equipped with a positioning belt, this belt is not

designed to provide proper restraint during motor vehicle transport. Anyone traveling in

a motor vehicle should be properly secured in the motor vehicle seat with safety belts

fastened securely.

WARNING! Do not sit on your scooter while it is in a moving vehicle.

WARNING! Always be sure your scooter and its batteries are properly secured when it is

being transported. Batteries should be secured in an upright position and protective caps

should be installed on the battery terminals. Batteries should not be transported with any

flammable or combustible items.

GETTING ONTO AND OFF OF YOUR SCOOTER

Getting onto and off of your scooter requires a good sense of balance. Please observe the following safety
tips when getting onto and off of your scooter:

Remove the key from the key switch.
Ensure that your scooter is not in freewheel mode. See III. “Your Scooter.”
Make certain that the seat is secured into place.
Pivot the armrests up to make getting onto and off of the scooter easier.

WARNING! Position yourself as far back as possible in the scooter seat to prevent the

scooter from tipping.

WARNING! Avoid putting all of your weight on the scooter armrests and do not use the

armrests for weight bearing purposes, such as transfers. Such use may cause the

scooter to tip, resulting in a fall from the scooter and personal injury.

WARNING! Avoid putting all of your weight on the floorboard. Such use may cause the

scooter to tip. 

REACHING AND BENDING

Avoid reaching or bending while driving your scooter. Bending forward creates the risk of accidental throttle
control lever contact. Bending to the side while seated creates the risk of tipping. It is important to maintain
a stable center of gravity and keep the scooter from tipping. Pride recommends that the scooter user determine
his/her personal limitations and practice bending and reaching in the presence of a qualified attendant.

WARNING! Do not bend, lean, or reach for objects if you have to pick them up from the

scooter deck or from either side of the scooter. Movements such as these may change your

center of gravity and the weight distribution of the scooter and cause your scooter to tip.

PROHIBITED! Keep your hands away from the tires when driving. Be aware that loose

fitting clothing can become caught in drive tires.

POSITIONING BELTS

Your authorized Pride Provider, therapist(s), and other healthcare professionals are responsible for deter-
mining your requirement for a positioning belt in order to operate your scooter safely.

WARNING! If you require a positioning belt to safely operate your scooter, make sure it

is fastened securely.

Содержание Pursuit XL













































Отзывы: