Pride PATHRIDER ES10, Руководство пользователя

Страница: 27 / 44

27 www.pridemobility.com Pathrider ES10
BATTERY
HARNESS
CONNECTION
I V . B A T T E R I E S A N D C H A R G I N G
How do I change a battery in my scooter?
MANDATORY! Battery posts, terminals, and related accessories contain lead and
lead compounds. Wear goggles and gloves when handling batteries and wash
hands after handling.
WARNING! Always use two batteries of the exact same type, chemistry, and amp-
hour (Ah) capacity. Refer to the specifications table in this manual and in the
manual supplied with the battery charger for recommended type and capacities.
WARNING! Do not mix old and new batteries. Always replace both batteries at the
same time.
WARNING! Contact your authorised Pride Provider if you have any questions
regarding the batteries in your scooter.
WARNING! Do not replace the batteries while the scooter is occupied.
WARNING! The batteries on your scooter should only be serviced or replaced by
an authorised Pride Provider or a qualified technician.
PROHIBITED! Keep tools and other metal objects away from battery terminals.
Contact with tools can cause electrical shock.
To change the batteries in your scooter:
WARNING! Do not lift beyond your physical capability. Ask for assistance when necessary
while disassembling or assembling your scooter.
1. Remove the seat and battery shroud.
2. Disconnect the battery tie-down straps.
3. Disconnect the battery harnesses by depressing the tabs and then pulling them straight up. See figure 13.
4. Disconnect the battery cables from the battery terminals by sliding back the terminal boots and
unscrewing the nut from the bolt. See figure 15.
5. Remove the old batteries from the battery wells.
6. Place a new battery in each battery well. Face the battery terminals of each battery away from the seat
post. See figure 14.
Figure 14. Battery Wiring Diagram Figure 13. Battery Removal/Installation
BATTERY TERMINALS
UNDER BOOTS