Pride PATHRIDER 10 DELUXE, Руководство пользователя

Страница: 31 / 43

31
Pathrider 10 Deluxe www.pridemobility.com
TILLER ANGLE ADJUSTMENT
WARNING! Remove the key from the
key switch before adjusting the tiller
or the seat. Never attempt to adjust
the tiller or the seat while the
scooter is in motion.
Your scooter is equipped with an adjustable pivoting tiller.
1. While supporting the tiller, turn the tiller adjust-
ment knob anticlockwise to loosen the tiller. See
figure 13 .
2. Move the tiller to a comfortable position.
3. Turn the tiller adjustment knob clockwise to
secure the tiller in position.
NOTE: In order to fully lower the tiller for purposes of
disassembly or transport, you must first completely
remove the seat. See VII. “Disassembly and Assembly.”
MIRROR POSITION
To install the mirror (see figure 14):
1. Determine on which side to install the mirror and
remove the rubber plug from the top of the tiller handle.
2. Insert the threaded end of the mirror holder into
the opening and rotate it clockwise until snug.
3. If necessary, rotate the nut clockwise to secure
the mirror in place.
To adjust the mirror:
1. Position yourself in a seated driving position fac-
ing forward.
2. Adjust the mirror left, right, up, or down until you
have a good line of sight behind you.
SEATBACK ADJUSTMENT
WARNING! Do not operate your scooter
with the seatback in a reclined position.
WARNING! Always keep your back
pressed firmly against the seatback
while adjusting the angle.
To adjust your scooter's reclining seat, perform these
steps.
See figure 15 .
1. With your back pressed up against the seatback,
lift up on the seatback adjustment lever and lean
forward or rearward to adjust the seatback angle.
2. Release the seatback adjustment lever once the
seat is in a comfortable riding position.
V I . C O M F O R T A D J U S T M E N T S
TILLER
ADJUSTMENT
KNOB
Figure 13. Tiller Adjustment
Figure 14. Mirror Installation and Positioning
Figure 15. Seatback Adjustment
MIRROR HOLDER
RUBBER PLUG
NUT
SEATBACK
ADJUSTMENT
LEVER