Pride Outlander DE, Руководство пользователя

Страница: 17 / 51

17
Outlander www.pridemobility.com
4. Raise the lift platform by turning and holding the key in the counterclockwise direction. See figure 11 .
Continue to raise the lift until the motor stops, then release the key.
NOTE: As the lift platform rises, the automatic lock-down arm activates to secure the scooter to the lift
platform. You may need to adjust the scooter’s tiller position to prevent interference with the smooth
operation of the automatic lock-down arm.
NOTE: The motor will stop automatically at the top of its stroke and will emit a clicking sound. Release
the key upon hearing this sound.
NOTE: Pay attention to the path of the lift platform during operation. Make sure the lift does not rub against
or interfere with the vehicle in any way. If you notice any contact between the lift platform and the vehicle,
stop lift operation immediately and contact your authorized Silver Star Provider for assistance.
Follow these steps to remove a mobility device from the lift system:
1. Lower the lift platform to the ground.
2. Unfasten the tie-down straps or allow the lock-down arm to automatically return to the vertical
position.
Unlock and loosen the tie-down straps.
Rotate the adjustment lever only on each strap forward and rearward in a ratcheting motion until each
strap reaches its original furled position.
3. Unload the mobility device from the lift platform.
WARNING! Do not attempt to manually pull the lift platform down from the stowed
position. Doing so will result in product damage and will void the product warranty.
4. Raise the lift platform for storage, noting that it will automatically fold into a stowed position.
POWER DOCK OPERATION (POWER CHAIRS ONLY)
The power dock is only used with power chairs and requires a power dock adaptor be installed onto the
power chair.
To load a power chair:
1. Lower the lift platform completely to the ground. Make sure the red LED light is now illuminated. See
figure 16 .
2. Load the power chair onto the platform, ensuring the power dock adaptor is in line with the power
dock’s “V-channel.” See figure 16 .
WARNING! Set the power chair’s speed to its slowest setting.
3. Advance the power chair to the point where the power dock adaptor is fully engaged with the power
dock. The “V-channel” will help guide the power dock adaptor into its proper position. See figure 16 .
4. Ensure the power dock adaptor is secured into the power dock then turn the power chair off. See
figure 17 .
5. Elevate the platform until the red LED is no longer illuminated. If the LED does not turn off once the
lift is completely off the ground, stop the lift and visually inspect the power dock adaptor, making sure
it is secured properly into the power dock. Readjust as necessary.
6. Fully elevate the platform.
I V . O P E R A T I O N