Pride Luna Victory, Руководство пользователя

Страница: 33 / 48

Luna Victory Series www.pridemobility.com
33
V I . C O M F O R T A D J U S T M E N T S
Figure 21. Seat Height Adjustment
LOWER
SEAT
POST
SEAT HEIGHT
ADJUSTMENT
BOLT
NUT
LOCATING
HOLE
UPPER SEAT
POST
Figure 20. Seat Position Adjustments
ARMREST ANGLE ADJUSTMENT
The armrest angle of your scooter can be adjusted
upward or downward by turning the adjustment dial.
See figure 19.
NOTE: Pivot the armrests upward to make getting
onto and off of your scooter easier.
SEAT ROTATION ADJUSTMENT
The seat rotation lever will secure the seat into
several positions.
1. Push forward on the seat rotation lever to
disengage the seat. See figure 20 .
2. Rotate the seat to the desired position.
3. Release the lever to secure the seat into place.
FRONT-TO-BACK SEAT ADJUSTMENT
You can reposition the seat forward or rearward to
adjust the distance between the seat and the tiller.
1. Move the seat sliding lever located at the lower
left side of the seat outward. See figure 20 .
2. While holding the lever out, slide the seat
forward or rearward.
3. Release the seat sliding lever once the seat is in
the desired position.
SEAT HEIGHT ADJUSTMENT
The seat can be repositioned to several different
heights. See figure 21 .
1. Remove the seat and/or shroud from your
scooter. See VII. “Disassembly and Assembly.”
2. Remove the seat height adjustment bolt.
3. Raise or lower the upper seat post to the desired
seat height.
4. While holding the upper seat post at that height,
match up the locating holes in the upper seat post
with those of the lower seat post.
5. Insert the seat height adjustment bolt through the
locating holes of both the upper and lower seat
posts.
6. Reinstall the nut onto the seat height adjustment
bolt and tighten.
7. Reinstall the rear shroud and the seat.
SEAT ROTATION LEVER
ADJUSTMENT DIAL
SEAT SLIDING LEVER
Figure 19. Armrest Angle Adjustment
BOLTS