Pride ATHENA, Руководство пользователя, Страница: 35 / 40

Athena www.pridemobility.com 35
A P P E N D I X I - S P E C I F I C A T I O N S
1
Varies with base model, user weight, terrain type, battery amp hour rating (Ah), battery charge, battery
condition, motors, controller type, tyre type and tyre condition. This specification can be subject to variance
of (+ or – ) 10%.
2
Due to manufacturing tolerances and continued product improvement, this specification can be subject to
variance of (+ or – ) 3%.
3
AGM or Gel-Cell type required. See VI. “Batteries and Charging.”
4
Tested in accordance with ASNI/RESNA, WC Vol 2, Section 4 and ISO 7176-4 standards. Results derived
from theoretical calculation based on battery specifications and drive system performance. Test conducted
at maximum weight capacity.
NOTE: This product conforms to all applicable ANSI-RESNA testing requirements and ISO 7176 series
EN12184 standards. All specifications subject to change without notice.
SPECIFICATIONS
Suspension Full Suspension - Sport Trac
Drive Wheels 35.5 cm (14 in.), centre-mounted, pneumatic or solid available
Castor Wheels
25.4 cm (9 in.), front articulating, pneumatic and solid available
Anti-tip Wheels 10 cm (4 in.) solid, rear-mounted
Maximum Speed
1
Up to 10.46 km/h (6.5 mph)
Brakes “Intelligent Braking” electronic regenerative, disc park brake
Ground Clearance
2 See figure 19.
Turning Radius
2 See figure 19.
Overall Size
2
Length: See figure 19.
Width: See figure 19.
Drivetrain Two motor, rear-wheel drive
Batteries
3 Two 12-volt 70 Ah Group 24 batteries
Range
1,4
Up to 23.57 km (14.65 miles)
Battery Charger Off-board
Weight Capacity 136 kg/21 stone/300 lbs.
Component Weights
Base: 65.32 kg (144 lbs.)
Batteries: 24 kg (53 lbs.) each