background image

S A F E T Y   G U I D E L I N E S

WARNING! An authorized Pride Provider or a qualifi ed technician must perform the initial setup 

of this power chair and must perform all of the procedures in this manual.

The symbols below are used throughout this owner’s manual and on the power chair to identify warnings and 
important information. It is very important for you to read them and understand them completely.

WARNING! Indicates a potentially hazardous condition/situation. Failure to follow designated 

procedures can cause either personal injury, component damage, or malfunction. On the 

product, this icon is represented as a black symbol on a yellow triangle with a black border.

MANDATORY! These actions should be performed as specifi ed. Failure to perform mandatory 

actions can cause personal injury and/or equipment damage. On the product, this icon is 

represented as a white symbol on a blue dot with a white border.

PROHIBITED! These actions are prohibited. These actions should not be performed at any 

time or in any circumstances. Performing a prohibited action can cause personal injury and/or 

equipment damage. On the product, this icon is represented as a black symbol with a red circle 

and red slash.

I

NTENDED

 U

SE

The intended use of the Pride Mobility Products device is to provide mobility to persons limited to a seated 
position that have the capability of operating a powered wheelchair.

Quick Reference Information

Copyright © 2016
INFMANU4722/Rev A/February 2016

NOTE: This owner’s manual is compiled from the latest specifi cations and product information available at 
the time of publication. We reserve the right to make changes as they become necessary. Any changes to our 
products may cause slight variations between the illustrations and explanations in this manual and the product 
you have purchased. The latest/current version of this manual is available on our website.

NOTE: This product is compliant with WEEE, RoHS, and REACH directives and requirements.

NOTE: This product meets IPX4 classifi cation (IEC 60529).

NOTE: This product and its components are not made with natural rubber latex. Consult with the manufacturer 
regarding any after-market accessories.

Authorized Pride Provider:

Address:

Telephone:

Purchase Date:

Содержание Air

































Отзывы: