background image

4

Copyright © 2017

INFMANU4884/Rev B/August 2017

I

ntended

 U

se

The intended use of the Pride Mobility Products device is to provide mobility to persons limited to a 
seated position that have the capacity of operating a scooter.

NOTE: This owner’s manual is compiled from the latest specifications and product information 

available at the time of publication. We reserve the right to make changes as they become 

necessary. Any changes to our products may cause slight variations between the illustrations 

and explanations in this manual and the product you have purchased. The latest/current version 

of this manual is available on our website.

NOTE: This product is compliant with WEEE, RoHS, and REACH directives and requirements.

NOTE: This product meets IPX4 classification (IEC 60529).

NOTE: The product and its components are not made with natural rubber latex. Consult with the 

manufacturer regarding any after-market accessories.

WARNING! Avoid abrupt maneuvers at excessive speed. It is recommended that you operate the 

scooter at the slowest speed until you become familiar with scooter controls and operation.

WARNING! An authorized Pride Provider or qualified technician must perform the initial setup of 

this scooter and must perform all of the procedures in this manual.

The symbols below are used throughout this owner’s manual and on the scooter to identify warnings 
and important information. It is very important for you to read them and understand them completely.

WARNING! Indicates a potentially hazardous condition/situation. Failure to follow designated 

procedures can cause either personal injury, component damage, or malfunction. On the product, 

this icon is represented as a black symbol on a yellow triangle with a black border.

MANDATORY! These actions should be performed as specified. Failure to perform mandatory 

actions can cause personal injury and/or equipment damage. On the product, this icon is 

represented as a white symbol on a blue dot with a white border.

PROHIBITED! These actions are prohibited. These actions should not be performed at any time or 

in any circumstances. Performing a prohibited action can cause personal injury and/or equipment 

damage. On the product, this icon is represented as a black symbol with a red circle and red slash.

S A F E T Y   G U I D E L I N E S

Содержание raptor series

































Отзывы: