9
Mobility Products. Ltd.
www.pridemobility.co.uk
IV.
Solid Tyre
1.
Turn off power to the joystick.
2.
Ensure the unit is in drive mode.
3.
Prop up the side of the unit being serviced.
Tools Required:
- Imperial and Metric Socket Set
- Calibrated Torque Spanner/Wrench
- Phillips Screwdriver
4.
Remove the drive wheel.
See Section III.
5.
Remove the 4 nuts that secure the wheel to the hub.
6.
Remove and replace the solid tyre.
7.
Re-assemble the rim with the solid tyre with the nuts retained from step 5.
8.
Replace the drive wheel back onto the motor.
See Section III.
Torque the 4 nuts to
30 N • m (21.7 ft • lb)
and the
main nut to
28.5 N • m (21 ft • lb).
***Make sure the Axle Key is inserted back into the motor shaft.***
1
Tor
q
ue the nuts to
3
0 N • m (21.7 ft • l
b
)
Tor
q
ue the nut to
2
8
.5 N • m (21 ft • l
b
)
2
7
Solid Tyre removal and installation
