16
Mobility Products. Ltd.
www.pridemobility.co.uk
XI. Joystick
1.
Turn off power to the joystick.
2.
Ensure the unit is in drive mode.
Tools Required:
- Phillips Screwdriver
- Wire Cutters
3.
Disconnect the joystick harness from the bus extension cable that is located near the back of the unit. Cut the cableties
to free the joystick cable.
4.
Flip up the armrest and remove the 2 mounting screws on the mounting bracket.
5.
Reverse steps 3 and 4 for installation. Replace the cableties.
Ca
b
letie
Locations
Joystick Harness removal and installation
Joystick removal and installation
1
