Pride Mobility Maxima, Руководство пользователя

Страница: 31 / 43

Maxima 31
I X . D I S A S S E M B LY A N D A S S E M B LY
Figure 16. Seat Removal Figure 17. Rear Shroud Removal
No tools are required to disassemble or assemble your Maxima. Always disassemble or assemble your
Maxima on a level, dry surface with sufficient room for you to work and move around your scooter. Keep
in mind that the disassembled sections of the Maxima take up more floor space than the assembled scooter.
To disassemble:
1. Place the manual freewheel lever in the drive (down) position.
2. Coil the charger power cord and store it in the rear storage compartment.
3. Lift the seat straight up and off the Maxima. See figure 16.
4. Gently lift the rear shroud off of the Maxima. See figure 17.
5. Disconnect the battery tie-down strap that holds the batteries in place.
6. Unplug both black and white 2-pin battery harnesses. See figure 18.
7. Unplug the front-to-rear harness from its mating plug. See figure 19.
DISASSEMBLY
You can disassemble the scooter into seven pieces:
the seat, the front section, the rear section, the rear
shroud, the basket, and the batteries. See figure
15. Place the scooter in an area where you have
sufficient clearance to move the parts around. You
need about four or five feet in all directions. You
may need assistance to lift some of the scooter
components. See IV. “Specifications” for
individual component weights.
SEAT
REAR SHROUD
REAR SECTION
BATTERIES
BASKET
FRONT SECTION
Figure 15. The Maxima Disassembled
Figure 19. Disconnecting The Front-to-Rear Harness Figure 18. Disconnecting The Battery Harnesses