Jazzy 1107
www.pridemobility.com
29
NOTE: Each drive tire must be inflated to 35 psi (2.4
bar) if equipped with pneumatic tires. The user must
also be seated in the power chair in order to properly
adjust the anti-tip wheels.
To adjust the anti-tip wheels:
1. Loosen nut A. See figure 25.
2. Remove bolt B.
3. Raise or lower the anti-tip wheel. Each hole is 1/2-in. apart.
4. Reinstall bolt B.
5. Tighten nut A.
6. Raise or lower the other anti-tip wheel so that it is at the
same height.
V . C O M F O R T A D J U S T M E N T S
MULTI-AXIS FOOT PLATE
The multi-axis foot plate assembly can be installed on either a
swing-away footrest or an elevating leg rest. The multi-axis
foot plate has four adjustments: leg rest length (A), position
(B), tilt (C), and angle (D). See figure 26.
To change leg rest length (A):
1. Remove the hardware.
2. Move the leg rest to the desired position.
3. Reinstall the hardware.
To change foot plate position (B):
1. Remove the hardware.
2. Move the foot plate to the desired position.
3. Reinstall the hardware.
To change foot plate tilt (C):
1. Loosen the hardware.
2. Tilt the foot plate to desired position.
3. Tighten the hardware.
To change foot plate angle (D):
1. Turn the setscrew clockwise to decrease the angle.
2. Turn the setscrew counterclockwise to increase the angle.
A
C
D
B
B
C
D
A
Figure 26. Multi-Axis Foot Plate (ELR Shown)
SETSCREW
