24
www.pridemobility.com
AUS Jazzy 1103 Rev E/Sep02
V I I . D I S A S S E M B L Y
SEAT REMOVAL
You may wish to remove the seat to transport your Jazzy.
To remove the seat:
1. Turn the power off.
2. Make sure the Jazzy is not in freewheel mode.
3. Unplug main wire harness behind the seat.
4. Lift the seat up and out of the seat tower.
BODY SHROUD REMOVAL
The body shroud is a one-piece molded plastic body that covers the power base frame. You must remove the
body shroud in order to change the batteries and check the cable connections.
To remove the body shroud:
1. Turn the power off.
2. Make sure the Jazzy’s motor is disengaged. See III. “The Jazzy 1103.”
3. Unplug the controller wiring harness.
4. Remove the seat.
5. Lift the body shroud straight up. It should lift up easily.
6. Be sure to reengage the drive motors.
BATTERY REMOVAL
To remove the batteries, see VIII. “Care and Maintenance.”
