Basic Operation Instructions
15
www.pridemobility.com
Remote Plus Controller
SPEED ADJUSTMENT/PROFILE SELECT
To select a speed setting:
1. Press the on/off key to power on the controller.
2. Press the mode key once.
3. To increase chair speed, push the joystick to the right. Each time you push the
joystick, you will increase the speed setting in the speed setting indicator.
4. To decrease chair speed, push the joystick to the left. Each time you push the
joystick, you decrease the speed setting in the speed setting indicator.
5. Once you select the desired speed setting, press the mode key once to keep
the setting or push the joystick in the forward or reverse direction. The chair
will resume operation at the selected speed.
NOTE: Drive profiles are set by your authorized Pride Provider. Contact
your authorized Pride Provider to change a drive profile or change speed
settings.
SLEEP MODE
The Remote Plus Controller features a sleep mode. Sleep mode is a built-in circuit
that will automatically shut off the main power if the joystick is not moved in any
direction for a period of time. This time factor is programmed into the controller.
To restore power and continue, push any key on the control panel.
THERMAL ROLLBACK
The Remote Plus Controller is equipped with a thermal rollback circuit which
monitors the temperature of the chair’s motors and controller. If either exceeds
the safe operating temperature, the controller reduces the output to 50% of full
operation level. This reduces the chair’s speed and allows a cool down period.
Once the temperature returns to a safe level, the chair will resume normal operation.
