Pride Mobility IGO Fold, Руководство пользователя

Страница: 58 / 64

25
„ Check all electrical connections. Make sure they are tight and are not corroded. Refer to the battery
wiring label for the correct wiring layout.
WARNING! Even though the power chair has passed the necessary testing requirements
for ingress of liquids, you should keep electrical connections away from sources of
dampness, including direct exposure to water or bodily fluids and incontinence. Check
electrical components frequently for signs of corrosion and replace as necessary.
Daily Checks
„ With the controller turned off, check the joystick. Make sure it is not bent or damaged and that it returns
to the neutral position when you release it. Check the rubber boot around the base of the controller for
damage. Visually inspect the boot. Do not handle or try to repair it. See an authorized retailer if there is a
problem.
„ Visually inspect the controller harness. Make sure that it is not frayed, cut, or has any wires exposed.
See an authorized retailer if there is a problem.
„ Check for flat spots on solid tires. Flat spots could adversely affect stability.
„
Inspect the seating system, armrests, and front riggings for loose hardware, stress points or damage.
See your authorized retailer if there is a problem.
Weekly Checks
„ Inspect the controller for signs of corrosion. Contact an authorized retailer if necessary.
„ Ensure that all parts of the controller system are securely fastened to your power chair. Do not overtighten
any screws.
„ Check for proper tire inflation. If a tire does not hold air, contact your authorized retailer for
replacement of the tube.
„ Check the brakes. This test should be carried out on a level surface with at least 3 feet (1 meter) of
clearance around your power chair.
To check the brakes:
1. Turn on the controller and turn down the speed level on your power chair.
2. After one second, check the battery condition meter. Make sure that it remains on.
3. Slowly push the controller forward until you hear the electric brakes click. Immediately release the
controller. You must be able to hear each electrical brake operating within a few seconds of controller
movement. Repeat this test three times, pushing the controller rearwards, then left, and then right.
Monthly Checks
„ Check that the anti-tip wheels do not rub the ground when you operate the power chair. Adjust them
as necessary.
„ Check for drive tire wear. See an authorized retailer for repair.
„ Check the caster wheels for wear. Replace them as necessary.
„ Check the caster forks for damage or fluttering which indicates that they may need to be adjusted or
have the bearings replaced. See an authorized retailer for repair.
„
Check the entire power chair for loose hardware and changes in the function or performance of the