Pride Mobility IGO Fold, Руководство пользователя

Страница: 47 / 64

14
MANDATORY! Prevent controller harness
damage! Avoid routing the controller harness
on the outside of the armrest pad. Route the
harness under the armrest or toward the
inside of the armrest pad. Use correct tie-
down points for the controller harness to
prevent the harness from getting caught in
the drive tires, pinched in the seat frame, or
damaged when passing through doorways.
Disassembly
The power chair disassembles into four components: the
base, the battery box, the cup holder, and the controller.
To disassemble the power chair:
1. Turn off the power to the controller.
2. Place the power chair in drive mode, if not in drive
mode already. See “Your Power Chair.”
3. Unlatch the quick adjust the rotate knob, See
figure 5.
4. Grasp the battery box handle and lift up the locking
pin to disengage the box from the power base, then
slide the battery box out of the power base. See
figure 4.
Folding and Unfolding
Figure 5. Armrest Component Removal/Installation
Your power chair can be folded for easy transportation and storage.
To fold the power chair:
1. Fold step from pic 1 to 5. See figure 6
2. Press controller button 1 to turn on the controller. See figure 6
3. Keep Pressing the controller button 7 for 3 seconds, make the wheelchair go to fold/unfold mode. See
figure 6 or 7
4. Keep Pressing the controller button 8 for 3 seconds, the wheelchair will fold automatically. See figure 6
To unfold the power chair:
1. Reverse the steps from Pic 1 to Pic 5. See figure 6 .
2. Press controller button 1 to turn on the controller. See figure 6
3. Keep Pressing the controller button 7 for 3 seconds, make the wheelchair go to fold/unfold mode. See
figure 6
4. Keep Pressing the controller button 9 for 3 seconds, the wheelchair will fold automatically. See figure 6
WARNING! To avoid injury, ensure the seatback is fully unfolded and the locking mechanism is engaged
before sitting in your power chair.
Identification Key
Rotate knob