Pride Mobility APEX ALUMALITE, Руководство пользователя

Страница: 9 / 32

Apex Alumalite
II . YO U R T RAVE L S C O O T ER
8
Drive Mode (Drive Engaged)
Freewheel Mode (Drive Disengaged)
IDENTIFICATION KEY
Manual Freewheel Levers
Anti-tip Wheels
WARNING! When your Travel Scooter is in freewheel mode, the braking system is disengaged.
◼
Disengage the drive motor only on a level surface.
◼
Ensure the key is removed from the key switch.
◼
Stand to the side of the scooter to engage or disengage freewheel mode. Never sit on a
scooter to do this.
◼
After you have finished pushing your Travel Scooter, always return it to the drive mode to
lock the brakes.
Figure 8. Rear Components
Manual Freewheel Levers -
For your convenience, your travel scooter has a manual freewheel lever on the motor. Manual freewheel levers
enable you to disable the drive system in order to maneuver the Travel Scooter manually.
See figure 8.
WARNING! Do not use the Travel Scooter while the drive motors are disengaged! Do
not disengage the drive motors when the travel scooter is on an incline or decline,
as the unit could roll on its own! Only engage the freewheel mode when on a level
surface.
WARNING! It is important to remember that when your Travel Scooter is in freewheel
mode, the braking system is disengaged.
NOTE: It is strongly recommended that you do not charge your batteries while in freewheel mode.
NOTE: You must turn off the power before disabling the drive systems; otherwise, you may get an error code
on the scooter. To clear this code, turn off the scooter and place the travel scooter in drive mode. Then turn on
the scooter. The error message should be cleared. If not, contact an authorized Provider.