Pribusin RCI-200-RF150, Инструкция по эксплуатации инструмента

Страница: 13 / 21

..\Manuals\RCI-200-RF150 rev.B.doc Page 7 of 15
Interrogation Interval:
This parameter determines how often the radios
connect to update the input and output signals.
SW1-4 SW1-5 Interrogation
interval
OFF OFF 10 sec
ON OFF 30 sec
OFF ON 1 min
ON ON 5 min
Reply Timeout:
The default reply timeout of 1 second is adequate
for most applications. If a longer timeout is
required it may be set to 10 seconds
SW1-6 Reply Timeout
(sec)
OFF 1
ON 10
RF Test Mode:
If the RF Test Mode is enabled, the radio will send
out a continuous tone on the selected MURS
channel. This can be useful during troubleshooting
but should never be enabled for a long time since it
may cause interference with other MURS radio
systems.
SW1-7 RF Test Mode
OFF Disabled
ON Enabled
NOTE
: While the RF Test Mode is enabled, the
RCI will NOT transmit any I/O signals.