PREVOST X3 Commuter, Руководство по эксплуатации

Страница: 146 / 228

5-50 Other Features
DOB 1300-1556 PA-1639 Operator's Manual 2020 X3-45 Commuter
4. Pull rollstop control knob out and rotate fully
counterclockwise. Rollstop must lie flat on
ground.
5. Carefully assist passenger off of platform.
6. Push the backup pump release valve actuating
rod back DOWN until lightly-snug.
To Manually Stow The Platform
1. Verify that the backup pump release valve is closed
(actuating rod (A) pushed DOWN).
2. Raise the platform to stow height; position the top
surface of the platform lifting frame arm at the same
height as the top surface of the carriage. If the exact
height cannot be obtained, a slightly low platform is
preferred to slightly high. This alignment eliminates
interference between the platform and enclosure
when pushing the platform into the enclosure.
FIGURE 13: LIFTING ARM AND CARRIAGE AT SAME
HEIGHT
3. Verify that rollstop is up (closed). Pull rollstop control
knob out and rotate fully clockwise, if it isn’t up.