PREVOST X3 Commuter, Руководство по эксплуатации

Страница: 129 / 228

Other Features 5-33
DOB 1300-1556 PA-1639 Operator's Manual 2020 X3-45 Commuter
Assignment Exact Text Acknowledge? Recur? Turns off if
High Battery HIGH BATTERY VOLT Yes No
12V voltage <
17V for 30sec or
24V voltage <
30V for 30sec
Check Diesel
Particle Filter
DIESEL.PART.FILT.. Yes No Message clears
Change Diesel
Particle Filter
DIESEL.PART.FILT. Yes No Message clears
Low Primary Air
Pressure
LOW.PRIMARY AIR No No
Air pressure
≥ 75 psi
Low Secondary
Air Pressure
LOW.SECONDARY.AIR No No
Air pressure
≥ 75 psi
Settings And Diagnostic Screens
The Settings and Diagnostic screens can be accessed when the drive mode screen is displayed and the M
button is pressed for longer than 5 seconds or if no CAN messages are seen then holding the M button will
enter the menu.
Once in the Settings and Diagnostics menu, pressing the M or T buttons separately moves the reverse video
highlight up or down through the list, as indicated by the arrows. The highlighted item is selected when both M
and T buttons are pressed at the same time. If no button is pressed for 5 seconds, the LCD will go back to the
standard Drive Screen. The items available in the menu are:
This menu exits to the drive mode screen when there has been inactivity for 5 seconds.
1 - Set Units
Selecting menu item 1 brings up the following screen that is used to select if values are to be displayed in
metric units or English units. Pressing
M or waiting 5 seconds exits to Settings and Diagnostics menu.
2 – Contrast
Selecting menu item 2 displays a screen to allow setting the LCD contrast. Pressing the M (+) button will
increase contrast while pressing the T (-) button will decrease contrast. After inactivity for 5 seconds this menu
exits to the Settings and Diagnostics menu.
3 – Instrument Diag