Section 16: SUPPLEMENT INFORMATION ON INDEPENDENT FRONT SUSPENSION (IFS)
16-13
6.
Idler Arm and Crank bell : Lubricate at
two fittings, one on the idler arm and the
other on the crank bell, every 6,250 miles
(10 000 km) with a good quality lithium-
base grease NLGI No. 2 (Shell Retinax
LX or equivalent). Apply grease gun
pressure to the fitting until lubricant ap-
pears at the top seal.
FIGURE 11: LUBRICATION FITTINGS' LOCATION DIAGRAM
16046
2.11 Power Steering Hydraulic
Pump
Refer to the "TRW Power Steering Pump
Service Manual" annexed at the end of this
supplement.
Содержание GKN AXLES LIMITED KIRKSTALL DIVISION
Страница 24: ...Section 16 SUPPLEMENT INFORMATION ON INDEPENDENT FRONT SUSPENSION IFS 16 7 FIGURE 6 CLAMPS POSITIONING 16041...
Страница 32: ...Section 16 SUPPLEMENT INFORMATION ON INDEPENDENT FRONT SUSPENSION IFS 16 15 FIGURE 12 BALL JOINT 16047...
Страница 36: ...Section 16 SUPPLEMENT INFORMATION ON INDEPENDENT FRONT SUSPENSION IFS 16 19 FIGURE 14 BALL JOINT 16049...
Страница 66: ...12 FIGURE 8 HUB UNIT AND STUB AXLE 10023...