Preco Electronics, Inc.
415 N. Maple Grove, Boise, ID 83704 (800) 453-1141
Copyright 2003
Page 4 of 10
370-894-1B
SPECIFICATIONS (Typical)
Sensor:
Pulsed RF Transmitter at 5.8GHz.
Electronics: Solid state
Sealing:
Encapsulated to protect from dust, moisture and vibration.
Housing Material:
Radar sensor:
Polycarbonate radome, Aluminum back plate
Operator display: Polycarbonate/ABS alloy
Dimensions:
Radar Sensor:
5.25” diameter x 1.25" deep (13.3cm x 3.2cm)
Operator display: 1.00”H x 2.25"W x 2.00"D (2.5cm x 5.7cm x 5.1cm)
Weight:
Radar Sensor:
1.75 lb. (0.8 kg)
Operator display: 0.25 lb. (0.11 kg)
Mounting:
Radar Sensor:
Three 0.188" (4.8mm) diameter.
Operator display: User dependent
Operating Temperature: All units:
-40
o
F to +185
o
F (-40
o
C to +85
o
C)
ELECTRICAL SPECIFICATIONS
Input Voltage:
9 – 33 volts DC
Input current:
0.25 amp maximum.
Polarity:
Polarity protected
Power Connection: Two 18 AWG wires
Relay Output:
Normally Open, 1 amp maximum continuous
MAINTENANCE
Daily: Follow test and maintenance procedure.
REGULATORY COMPLIANCE
Compliant with FCC Part 15.249 (5725-5875MHz).
FCC ID:
OXZSTDPREVIEW
PRODUCT MANUFACTURED IN THE USA
FCC STATEMENT
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undesired operation.
Warning: Changes or modifications to this unit not expressly approved by the party
responsible for compliance could void the user’s authority to operate the equipment.
