4
Please transmit events as soon after each recording as possible:
•
Call 888.500.3522. For the best quality, transmit recordings from a
land line phone and follow the directions of the technician.
•
Set the monitor on a flat surface with the speaker hole up and place
the telephone mouthpiece over the monitor speaker hole.
•
Push the
SEND
button for
two seconds,
until an audible sound is
heard. The monitor will make sounds while the recording is being sent.
•
A falling tone will sound when the transmission is complete.
Monitor
•
Press and hold the
RECORD
and
SEND
buttons at the same time for
two seconds
. Any previously
recorded events will be erased. (Will be followed by a single beep and rising tones.)
•
The monitor is ready to record again.
Sending an Event
Erasing an Event
