Rev１.0
191107
4
6 Structure Description
Front panel
1
Power Indicator
2
Running indicator: 1HZ frequency flashing green when the device is working normally
3
Laser working status indicator
：
Green light is always on: the laser is working normally.
Red light is always on: the laser is not turned on
Red light is flashing: The device has a parameter alarm. You can view the alarm content in the
Alarm Status Level 2 submenu.
4
Laser drive level indicator
：
Green light is always on: drive level is normal.
Red light is flashing: drive level alarm. You can view the alarm content in the Alarm Status Level 2
submenu.
5
Laser switch key
：
ON
：
Laser is on
OFF
：
Laser is off. Keep the laser off before the device is powered on, and turn on the laser after the power-on
self-test is completed.
6
Laser drive level detection port
：
-20dB
Rear panel
1
Fan
5
RF input 1 test port -20dB
9
RS232 interface
2
Ground stud
6
RF input 2 test port -20dB
10
LAN interface
3
RF input 1
7
Optical signal output
11
Power supply1, hot swappable
4
RF input 2
8
Optical signal input, there is no interface without
the WDM model.
12
Power supply 2 , hot swappable
Cordoba – Argentina - www.unicorsa.com.ar
C
re
at
ed
in
M
as
te
r P
D
F
Ed
ito
r
