Remove the 3 screws from the underside of the unit and remove the base cover. Fit
one 3V Coin Cell CR2032 battery, noting that the ‘+’ terminal goes uppermost (i.e.
‘+’ sign visible once installed). Replace the base cover and fix with the screws.
If you are not intending to use your
SWITCH 75
for an extended period of time, it
is advisable to remove the battery to prevent leakage, which may damage the product.
Your
SWITCH 75
unit automatically checks the battery voltage each time it
transmits data to the SimplyWorks receiver. If the battery voltage is found to be
low, the middle segment of the LED display [A] flashes briefly. This is an indication
that the battery should be changed soon, using the procedure described above.
Fitting the Battery
Low Battery Indication
The function of each
SWITCH 75
that you pair with
a USB receiver can be selected using the Mode
button and associated LED display on the
underside of the unit. Press the Mode button (M)
once and the LED display (A) will show the mode
that is currently selected. Use Table 1 to look up
the function from the number/letter displayed.
The default Mode is 7 (Space). Note: Information is
retained in
SWITCH 75
’s internal memory even
after changing the battery.
The modes that can be selected are a mix of button,
mouse and keyboard functions. Simply select the
mode according to your requirements.
To change the mode press the Mode button
repeatedly (or press and hold) while the display is
lit. It first scrolls through 0-9 and then A-U and
then back to 0.
The LED display is extinguished 4 seconds after
the last press of the Mode button to conserve power.
For example, if you are using a computer program
that requires Space and Enter as access switches,
pair two
SWITCH 75
’s with your
RECEIVE
, setting one
to mode 7 (Space) and the other to mode 8 (Enter).
Alternatively, if you need Left and Right Click, pair
two
SWITCH 75
’s with your
RECEIVE
, setting one
to mode 4 (Left Click) and the other to mode 5
(Right Click).
Operating with a USB Receiver (e.g. RECEIVE)
If the receiver you are Pairing
SWITCH 75
with is
a stand-alone type (for example a
CONTROL LITE,
CONTROL
or
CONTROL PRO
) then follow these
instructions:
1 Place
SWITCH 75
close to your receiver unit.
2 Briefly press the Pair button on the front
panel of the receiver. The Pair LED will begin
to flash slowly. Note that some receivers have
more than one Pair button - one for each
channel. Make sure you press the one you
need.
3 Within 10 seconds, press the Pair button on
Switch 75 (P)
4 The Pair LED on the receiver will continue to
flash for a short time while it negotiates with
SWITCH 75
. Once complete, the Pair LED
will light steadily for 5 seconds to indicate
success.
SWITCH 75
is then ready to use.
Whenever data is successfully sent to the
receiver its Pair LED flashes briefly to give a
visual indication that the wireless link is
operational.
5 If the Pair LED stops flashing after 30
seconds and does not light steadily, repeat
the process from (2). If it is still not successful,
please refer to theTroubleshooting section.
Pairing information is retained in
SWITCH 75
internal memory even after changing the battery.
Pairing with a stand-alone Receiver
5
6
7
8
9
Mouse
Mouse
Keyboard
Keyboard
Keyboard
Right Click
Mouse Functions
Drag Lock
Space
Enter
Tab
A
B
C
D
E
Keyboard
Keyboard
Keyboard
Keyboard
Keyboard
~
1
~
3
F7
F8
Numeral 2
F
G
H
Keyboard
Keyboard
Keyboard
Numeral 3
Up Arrow
Down Arrow
J
L
P
Keyboard
Keyboard
Mouse
Left Arrow
Right Arrow
Cursor Up
R
T
U
Mouse
Mouse
Mouse
Cursor Down
Cursor Left
Cursor Right
Mode Setting
Class
Function
Explanation
0
1
2
3
4
Switch
Switch
Switch
Switch
Mouse
Switch 1
Switch 2
Switch 3
Switch 4
Left Click
Gamepad functions - used
with various software including
Inclusive Technology and Crick†
Mouse Functions
General purpose keyboard
functions used widely for
computer access
Functions 7 and 8- used
with Clicker†, for example
General purpose keyboard functions
used widely for computer access
Tilda* functions used on
new tablet computer apps
Used with Intellitools†
and other US software
General purpose
keyboard functions
used mainly for
navigation
Mouse emulation
† All trademarks are the property of their respective owners and are acknowledged.
* Do not use the Tilda functions when controlling toys or mains appliances
(e.g. with CONTROL, CONTROL PRO or ENERGISE)
Before your
SWITCH 75
can be used it must be
paired with the SimplyWorks receiver that you
require it to work with. If the receiver is a computer
access such as
RECEIVE
, follow the instructions in
this section. If, alternatively, the receiver is a
stand-alone type (e.g.
CONTROL
or
CONTROL PRO
)
then refer to the next section.
1 Place
SWITCH 75
close to your
RECEIVE
2 Briefly press the Pair button on the front
panel of
RECEIVE
. The Pair LED will begin to
flash slowly.
3 Within 10 seconds, press the Pair button on
SWITCH 75
[P].
4 The Pair LED on
RECEIVE
will continue
to flash for a short time while it negotiates
with
SWITCH 75
. Once complete, the Pair
LED will light steadily for 5 seconds to indicate
success. The
SWITCH 75
is then ready to
use. Whenever data is successfully sent to
RECEIVE
its Pair LED flashes briefly
to give a visual indication that the wireless
link is operational.
5 If the Pair LED stops flashing after 30 seconds
and does not light steadily, repeat the process
from (2). If it is still not successful, please
refer to the Troubleshooting section.
Pairing information is retained in
SWITCH 75
internal memory even after changing the battery.
Pairing with a USB Receiver
10
