Learn Mode
Learn Mode is used to set the functions of each socket in Level 4. They are stored in the device’s
memory and are automatically recalled each time the unit is powered on, even when it is moved
to a different computer. You do not need to be in Level 4 to enter Learn Mode.
Before entering Learn Mode, ensure that there is a switch plugged into sockets 1 and 2 and then
open a text editor on your computer such as Notepad, WordPad or Word and ensure it has ‘focus’
by clicking within it. Now
press and hold
the Level button [8] until a warbling tone is heard as the
unit enters Learn Mode.
NB: While you are in Learn Mode, please don’t click away from the text editor and do not type
anything on the computer keyboard. Note that you cannot use the Level Socket [7] to enter
Learn Mode.
The moment you enter Learn Mode you will begin to see text appear in the text editor showing
the current function of Socket 1 in Level 4. The example below indicates that socket 1 is set so
the switch plugged into it sends a space when pressed.
The switch plugged into socket 1 may be used to move forwards through the list of possible
functions in Table 2, whereas the switch in socket 2 may be used to go backwards through the list.
When you have selected the required function for socket 1, press the Level button [8]
briefly
to
go on to socket 2 and again use the switches in sockets 1 and 2 to set the required function. You
do not necessarily need to make any changes- if the current socket is set as you wish, simply
press the Level button [8] to go to the next socket.
