Presys
PRESYS
⏐
Instruments
DCY-2058 and DCY-2059
Introduction
Page 2
ENTER keys for changing output values is described in section 3.1. The A/M key on the
Stations front panel allows toggling between automatic and manual modes for the
Auto-Manual Stations. The green led in the A/M key indicates, when illuminated, the
Stations are in the manual mode and, when off, the Stations are in the automatic mode.
In configuration mode both displays show mnemonics and parameter values. The pair of
red leds are used as a visual indication that the input and output shown on the displays
refer to loop 1 or 2.
1.2 - Order Code Number
Note 1: DCY-2058/2059 Stations configuration is described in detail by this technical
manual and can be easily done by the user. If desired, specify the configuration
so that the instrument is configured at
Presys
.
Note 2: Other hardware and software features can be available under previous consult.
Code
Example
:
DCY - 2058 - 2 - 1 - 0 - 0
This code defines a dual loop station, with power supply in the 90 to 240VAC or
130 to 340VDC range, not using communication and intended for use in a sheltered
place.
