P r e s t o n C i n e m a S y s t e m s
Bracket Assembly:
Pan Bracket & Pan Bracket Clamp Horizon Bracket
:
System includes:
••••
2 motor assemblies
- Motor in housing with pinned hub
- Gear
- Three 4-40 x 3/8” Flat head Stainless Screws
••••
Horizon Bracket (w / screws)
- Eccenter
- Four 4-40 x 5/16” Cap head screws
- Kipp Handle (10-32 thread)
••••
Pan Bracket & Clamp
-
Eccenter
-
Kipp Handle (10-32 thread)
Revolution lens setup:
Requirements:
•
Hand Unit, MDR, and Micro Force with cables for each.
•
Hand Unit and MDR must have Snorkel Lens Software and 2 position switch
Operation:
•
The snorkel mode must be enabled with the switch on the hand unit.
IMPORTANT! – TRANSMITTER SHOULD BE ON OR
THE HAND UNIT MUST BE HARD WIRED TO MDR
BEFORE MOTORS ARE CONNECTED!
(Motors may attempt to calibrate and damage the lens if this step is not followed)
4-40 x 5/16” Cap
Eccenter
10-32 x ½ “ Cap
Eccenter
