PRESTO OWNER’S MANUAL
Page 11
POWER STAK
•
Do not
overload. Check load center and load
weight capacities on the nameplate.
•
Make sure travel and work area is clear of obstruc-
tions.
•
Check overhead clearance before lifting loads or
transporting.
B.
DAILY OPERATIONS
MAINTENANCE CHECKS:
1. Battery
A. Check for corroded and loose terminals.
A
white powder substance will be present if there is
any existing corrosion.
B. Visually inspect for any cracks or damage to the
casing.
C. Check for loose battery tie-downs.
2. Charger
A. Inspect wire connections.
B. Check power cord for nicks/damage.
C. Check power charger for proper mounting.
3. Hydraulic System
D. Inspect pump and cylinder for oil leaks.
E. Check hydraulic oil level.
F. Check hydraulic fittings and hoses.
G. Check ram for nicks/damage.
4. Frame Assembly
A. Check chain roller assembly connections.
B. Check for any worn or damaged parts.
DAILY OPERATOR CHECK LIST
CHARGE CONDITION/BATTERY CHECK LIST
1. Check Battery Discharge Indicator (Fuel Gage and Hour Meter) – Be sure unit is showing
proper Charge
Level
before operating unit
2. Check to be sure
Charging Cord
is
Unplugged
and properly stowed before operating unit
3. Inspect Battery Wire Connections – All connections should be tight with
No Corrosion
(white powder)
showing at the
Battery Terminals
4. Inspect Battery Case – There should be
no cracks or visible damage
to the
Battery Case
WALK AROUND INSPECTION
1. Check general condition of Stacker (loose or broken parts, oil, dangling wires, dents, cracked covers etc.)
2.
Check metal frame, mast, carriage and font load supports for cracked welds, worn or flat rollers, loose or
disconnected chains, loose pins, missing snap rings, and loose or missing hardware – bolts, nuts washers etc.
3. Check for evidence of hydraulic leaks
4. Make sure all precautionary labeling is in place and legible
FUNCTIONAL INSPECTION
1. Check Drive – Forward and Reverse Function
2. Check Lift – Up and Down Function
3. Check Function for Belly Button Reverse
4. Check Horn Function
5. Check Brake Function
OPERATOR
ID
DATE
_____________________________________
____________________________________
DO NOT USE OR OPERATE STACKER IF ANY FUNCTION IS NOT
OPERATING PROPERLY OR IF STACKER APPEARS UNSAFE IN ANYWAY
REPORT CONCERNS TO SUPERVISOR IMMEDIATELY!
