Presto Lifts ECOA Series Скачать руководство пользователя страница 21

Presto Lifts

P4 Manual

21

11.  Warranty & Contact Information

Presto Lifts Corp. warrants this product to be free from defects in material or workmanship for the 

duration of the warranty period. Warranty periods vary and begin on the date of shipment. For 

specific warranty information, contact Presto Lifts with the machine’s serial number.

Any claim for breach of this warranty must be received in writing by Presto within the warranty 

period. Warranties shall not cover failure or defective operation, caused by misuse, misapplication, 

negligence or accident, exceeding recommended capacities, or any alteration or repair of the item 

purchased which has not been authorized by Presto. Except as set forth herein, Presto makes no 

other warranties, express or implied, including THE WARRANTIES OF MERCHANTABILITY AND 

OF FITNESS FOR A PARTICULAR PURPOSE, all of which ARE HEREBY EXCLUDED.
Presto meets the labeling requirements of California’s Proposition 65. Presto makes no warranty 

or representation with respect to the compliance of any product with other State or local safety 

or product standard codes and any failure to comply with such codes shall not be considered a 

defect of material or workmanship under this warranty. Presto shall not be liable for any direct or 

consequential damages arising out of such non-compliance.
Presto’s obligations under any warranty or for any other damages which may arise under any 

sale, agreement, or contract, are limited to the replacement or repair of defective components at 

its factory or another location at Presto’s discretion. This is buyer’s sole remedy under any such 

warranty, sale, agreement, or contract. Presto will not be liable for consequential, incidental, 

exemplary, or punitive damages of any kind resulting from a breach of any warranty that it has 

provided or for breach of any term of any sale, agreement, or contract. Any warranty may be 

altered only in writing by Presto.

Presto Lifts Inc. 

50 Commerce Way, Norton, MA 02766 

Phone: 800.343.9322  

Fax: 888.788.6496 

www.PrestoLifts.com 

Email: [email protected]

Содержание ECOA Series






















Отзывы: