Prestigio Visconte 1450W, Руководство пользователя

Страница: 33 / 52

33 PRESTIGIO VISCONTE 1450W
ENG
Computer, then click it.
Double-click the BisonCam, NB Pro icon.
Click Take a new picture in the Camera Tasks box.
Latest PC Camera Driver Information
Check the PC Camera CD, and any accompanying insert pages, for the latest updated information on the PC Camera driver,
which may override the information provided here.
Sertek PC Camera Driver Installation (WinXP)
1. Press the Fn + F10 key combination to power on the PC Camera module (click Cancel if you see a “New Hardware
Found” message).
2. Insert the PC Camera CD-ROM into the CD/DVD drive.
3. The program will run automatically.
4. Click Install Products.
5. Choose the language you prefer and click OK.
6. Click Next (click Continue Anyway if asked if you want to continue).
7. When the Found New Hardware Wizard appears click the No, not this time button, and click Next.
8. Select install the software automatically (Recommended) and click Next (click Continue Anyway if asked if you want
to continue).
9. Click Finish (in the Found New Hardware Wizard) > Finish (in the InstallShield Wizard) to restart the computer.
10. Run the BisonCap application program from the shortcut on the desktop, or from the BisonCam item in the Start
> Programs/All Programs menu (if the hardware is turned off use the Fn + F10 key combination to turn it on again).
PC Camera Audio Setup
If you wish to capture video & audio with your camera, it is necessary to setup the audio recording options in Windows.
1. Go to the Start menu and point to Settings (or just click Control Panel) and click Control Panel, then double-click the
Sounds & Audio Devices icon (Sounds, Speech, and Audio Devices in Category View).
2. Click Advanced in the Device volume tab.
3. Click Options and scroll down and click Properties.
4. Select Realtek HD Audio input from the Mixer Device menu.
5. Click Mic Volume (check box) if it is not checked, then click OK.
6. Make sure the Select (check box) in the Recording Control panel, under the Mic Volume section, is checked (boost the
volume as high as it will go).
7. Close the window, then click OK.
8. Run the BisonCap application program from the Start > Programs/All Programs > BisonCam menu.
9. Go to the Devices menu heading and select Realtek HD Audio input (it should have a tick alongside it).
10. Go to the Capture menu heading and select Capture Audio (it should have a tick alongside it).