3
User Manual | RoadRunner 600GPSDL
3
3. Settings
Before recording, you can set up the device according to your requirements.
-
In video preview mode, press [MENU] to enter video settings,
press it again to go to the general settings, press it third time to
exist.
-
In setting list, use [
▲
]/[
▼
] to navigate the menu, press [OK] to
get the options and confirm the selection, press [MENU] to exit.
Video settings
•
Resolution:
Select the resolution of recorded video: Front camera - WQHD 2560 x 1440, FHD
1920 x 1080; Rear camera - FHD 1920 x 1080.
•
Loop recording:
Video recording is provided in a cyclic order and chosen periods of time.
When
microSD card is full then the
oldest unprotected files will be replaced by new recorded
files.
•
Motion detection:
DVR automatically starts recording when motion is detected in front of
the camera. Recording stops when there is no movement any more but a delay of 15-20
seconds. The function works only when power is supplied.
•
Parking Mode:
In the Parking Mode G-
sensor is ON. While power off, device turns on and
starts
video recording automatically if shaking or stroke is detected. Aft
er recording (≈30 sec)
is finished,
the
device will
turn off un
til the next event.
Exposure Value (FRONT / REAR):
Sets the brightness /darkness of the video.
Record Audio:
Off/On. Set to record sound or not.
Date Stamp:
Off/On. Add date stamp onto videos.
G-
sensor:
A recording video file
becomes automatically protected when collision, shake or
emergency braking occurs.
LDWS:
Lane Departure Warning System.
FCW:
Forward-collision warning.
Set Time Zone:
Sets the current time zone for GPS time and date auto calibration. Note the
time zone must be manually adjusted for daylight savings.
Speed Units:
Select metric or imperial units.
Path Analysis:
Calculates the total distance, travel time, and average speed of your journey
from
the
beginning of your trip to the end (when camera is turned on to when turned off). If
Path
Analysis is set
to “on”, the results will be displayed on the screen when the unit is turned
off.
Normal recording will
resume if power is reconnected during display.
Driver Fatigue Warning:
Sets a timed delay before showing a visible alert reminding the
driver to take a break.
GPS Logging:
GPS function and stamp on the videos.
Head Up Display:
Screen will show current speed and direction. If enabled, the set speed
warning will also appear on display.
Speed Warning:
Visual on the head-up display along with sound warning when the set speed
has been exceeded.
Speed Stamp:
Warning to remind users to turn on headlight in dark.
Headlight Warning:
Diff
erent levels screen brightness.
Plate Stamp:
Imprint customizable letters and digits.
Password Settings:
Note: This does not prevent other users from extracting the memory card or
changing the
fi
les via computer.
