User Manual
RoadRunner 545 / RoadRunner 545GPS
2
2
2. Getting started
Insert a microSD card
Before starting video recording, please insert a microSD card (not included) into
the slot until it locks in place.
The device will automatically recognize it as default storage and all the data will be saved
on this card.
Install the suction mount
RESET
1.
Match the mounting slots of the device and the suction mount, and press the suction mount
until it locks in place.
2.
Remove the protection plastic film from the suction cup, and position the device on the clean
windshield or dashboard.
3.
Hold firmly against the surface and rotate the lock knob. The mount will suction and stick firmly
onto the surface.
To unmount, press the buckle and pull out the suction mount.
Charge the battery
Before using the device for the first time, please fully charge the Li-ion battery. The battery will be
completely charged in 2-3 hours.
•
Using the car charger: charge the device through cigarette lighter. The device will start charging
after the car engine is turned on.
The GPS receiver is built in the suction mount. Please connect the car charger to the mini
USB port on the mount.
•
Using the included mini USB cable: connect the device to AC 5V adapter or the USB port of a
computer/laptop.
