17
PRESTIGIO P323MW / P373MW
ENG
Scanning TV Channels (UHF Antenna Only)
When using the LCD TV for the first time it is recommended that you scan all available TV channels and store them in
memory. Once the available channels have been memorized, it is not necessary to scan for available channels in the future.
1. Press the MENU button to open the OSD main menu.
2. Press the P- button twice and press OK to open the Tuning menu.
3. Press the P- button to select Search.
4. Press the V+ button to start the automatic search.
5. Press EXIT to stop the search.
You can search manually.
1. Press the P- or P+ button to select Frequency.
2. Press the V+ or V- button to add or minus the value of frequency. This value will be retained the next time you power
on your TV.
3.2 Basic TV Controls
Selecting TV Channels
You can select TV channels in three ways:
* Pressing P- or P+ on the remote control
* Pressing CH /\ or CH \/ on the right panel of the TV
* Pressing the number buttons on the remote control
* To select a 1-digit channel, press the digit.
* To select a 2-digit channel, press the first digit and then the second digit within 3 seconds.
Adjusting Volume
You can adjust the volume in two ways:
* Pressing or on the remote control
* Pressing VOL /\ or VOL \/ on the right panel of the TV
To mute the sound, press the mute button on the remote control. To end the mute, press the same button again.
