
Eng
7
www.prestigio.biz
LINE OUT
34. Connecting the monitor
1. Insert the 15pin signal cable connector into the 15pin VGA connection on your
computer and screw it down.
2. Plug the power cord connection to connection on the monitor.
3. Plug the other end of the power cord to your computer's main supply or to a 100V
240V earthed electrical outlet.
4. Turn on the monitor using the power switch and check that the power LED is on. If
not, repeat steps 1,2,3 and 4 or refer to the Troubleshooting section of this guide.
5. Turn on the power to the computer. The picture will appear within about 10 sec
onds. Adjust the picture to obtain optimum picture quality. See section Adjusting the
picture in this guide for more information.
Audio system
This monitor has an audio system including two micro loudspeakers. Each of two micro
loudspeakers has an 2Wrms (max.) output power. This system also supports a head
phone output jack.
When this monitor is turned on, audio is always set up as off mode.
Please use AUDIO direct access button on the front cover or On Screen Display to
put audio on.
Speaker
P151_eng.PMD
03.10.2003, 11:34
7
Содержание P151
Страница 1: ...Prestigio P151 ...