Prestigio Nobile 1522E
19
ENG
Main Setup
Under this menu, you may change system time/date, system memory, and HDD information.
Item
Selection / Sub-menu
Description
Time
N/A
Type in the current time, in HH:MM:SS format.
Date
N/A
Type in the current date, in MM/DD/YY format.
Info Setup
Under this menu, you may view basic processor and BIOS Version information.
Advanced Setup
Under this menu, you may change POST beep, LAN Remote Boot and UMA Frame Buffer Size.
POST Beep: When enabled, the notebook will beep on POST.
LAN Remote Boot: When enabled, the system can support remote wake-up or boot on LAN.
UMA Frame Buffer Size: See Below.
Item
Selection / Sub-menu
Description
UMA
Frame
Buffer
Size
Auto
16MB
32MB
64MB
128MB
256MB
Select [Auto], the system will automatically set the appropriate shared memory
size for the graphic engine. Otherwise, you may choose a fixed size.
Security Setup
Item
Selection / Sub-menu
Description
Set Supervisor Password
Exit
Install or Change the Password
Set User Password
Go to Sub Screen
Install or Change the Password
Password on Boot
General Help
When enabled, the system will always ask for User
Password on boot
Using Password Protection
Two Levels of Password Protection are available. The BIOS provides both a Supervisor and a User password. If you try
to activate both passwords, the Supervisor password must be set first.
The passwords activate two different levels of protection:
1. System always asks for password every time it is powered on.
2. System asks for password only when you attempt to enter BIOS utility.
The passwords are encrypted and stored in NVRAM. Make sure you write them down or memorize them. If you lost
the passwords, the computer may need to be sent back to the factory or to an authorized service dealer to reset the
passwords.
