Prestigio MNAS-4100, Руководство пользователя, Страница: 81 / 83

75
CAUTION: If you do not shut down the new unit before you insert the hard disks, you will
be prompted to re-initialize the disks. If you do this, all the data on your hard disks will be
lost.
2. Transfer the hard disks to the new unit.
3. Connect the new unit to your network and power on the new unit.
4. Access the Storage System Console for the new unit.
As long as the new unit is in the same subnet as the old unit, you can access
the
Storage System Console using the same procedure you used
previously. However, if the new unit is in a different subnet, you might have
to install the Console on a computer in the same subnet as the storage system
and use the Console to access it.
5. If the firmware in the flash memory of the new unit differs from the
firmware on the hard disks, a message appears, prompting you to update the
flash memory on the storage system with the firmware from the hard disks.
Click on
Update
to proceed. If you do not want to upgrade the firmware at
this time, click on
Shut Down
to shut down the system.
NOTE: If the firmware on your new unit is newer than the firmware on your hard disks, you
might want to contact your vendor about obtaining the latest firmware. Refer to “Firmware”
on the previous section for information about upgrading to newer firmware.
If no message appears, you can manage the unit as you did before.