Prestigio MNAS-4100, Руководство пользователя, Страница: 80 / 83

74
To re-install the same disk, click on Shut Down . After the storage system shuts
down, re-install the same disk and then restart the system.
NOTE: If you removed multiple disks, be sure to re-install them in the opposite order that
you removed them.
To reconfigure the storage system using the available disks, click on
Reconfigure Disks and complete the system setup pages.
CAUTION: Reconfiguring the storage system deletes all user information and all data on
all the disks.
Swapping Hard Disks
If you are using RAID 5 + spare or RAID 10, you can move the hard disks from
one slot to another whether or not the storage system is running. However, if
you do this when the storage system is running, you can swap only two disks,
and you must restart the system after you swap the disks. If you swap the disks
when the storage system is not running, you can swap all four disks, and the
system will function as it previously did when you restart it.
NOTE: For RAID 5 + spare, if you swap the disks when the storage system is running, one
of the swapped disks must be the spare.
For RAID 10, the swapped disks must be in different pairs. For example, you can swap
disks 1 and 3 or disks 2 and 4, but not disks 1 and 2, as those are members of the same
pair.
If the storage system is running when you swap the disks, the Disk Change
Notification page appears (as shown in the preceding section). Click on
Shut
Down
and then restart the system.
For all other disk configurations (linear, RAID 0, RAID 1, and RAID 5), you
can swap the hard disks only when the storage system is powered off, and you
can swap all four disks.
Transferring Hard Disks to a New Storage System
If your storage system unit fails but the hard disks themselves are viable, you
can transfer your existing hard disks to a new storage system, thereby
preserving all your existing data.
To transfer hard disks to a new storage system:
1. Shut down both the old unit and the new unit.