Prestige PR60HOBG Скачать руководство пользователя страница 13

Страница: 13 / 20

INSTALLATION IN KITCHEN CABINET

WITH DOOR

(fig. 4.3)

It is recommended that a 30 mm clear-
ance be left between the cooker top and
the fixture surface (fig. 4.3).

;;

;

;;

;

;;;;;;;

;;;;;

30 mm

Fig. 4.3

Space for
connections

Clearance

Door

20 mm min.

40 mm max.

Fig. 4.4

FASTENING THE INSTALLATION

BRACKETS

(fig. 4.4)

✓

Each cooker top is provided with an
installation kit including brackets and
screws for fastening the top to fixture
panels from 2 to 4 cm thick.

✓

Turn the cooker top upside down and
fasten the brackets “A” to the appropri-
ate socket holes, without tightening
the screws “B” for the moment.

✓

Make sure that the brackets are fas-
tened as shown in figure 4.7.

FASTENING THE COOKER TOP

(fig.

4.4)

✓

Spread the sealing material “C” out
along the fixture hole, making sure
that the junctions overlap at the cor-
ners.

✓

Insert the cooker top into the hole and
position it correctly.

✓

Adjust the position of the brackets “A”
and tighten screws “B” to block the
cooker top firmly in position.

✓

Carefully trim away the excess gasket
material from around the hob.

Содержание PR60HOBG





















Результаты поиска

Содержание PR60HOBG

Отзывы:

Prestige PR60HOBG, Инструкция по эксплуатации, Страница: 13 / 20

Результаты поиска

Содержание PR60HOBG

Отзывы: