background image

128-9456

Page  6

Page 6

ALARM CLOCK  

This icon will be toggled on and off when the “F” + Trunk/Key buttons are pressed simul-

taneously.  The feature must be set in the feature selection menu of the transmitter.

COUNT DOWN TIMER 

The unit offers an additional count down timer for situations where an alert tone may be 

needed to remind you of something important.  Setting information shown on previous 

page. 

  

POWER SAVE FEATURE  

Press the “F” and Lock buttons simultaneously to toggle this feature on and off. With this 

mode on, the battery in the transmitter will go into a power down mode when the unit is 

disarmed.

 

24 HOUR START TIMER

  

Standing at the vehicle at the time you want it to start, press the lock buttons 

simultaneously for 1 seconds.  The transmitter will beep and display the 24 hr timer.  This 

is the time the vehicle will start when you follow the exit procedure.  In other words, if you 

want the vehicle to start 6AM, at 6AM of any morning, standing at the vehicle, press and hold the 

lock buttons until you hear a beep and the 24 hr timer is displayed.  This establishes a 

starting time. The unit will start at the prescribed time once only.  This function must be selected 

each time you want the vehicle to start.  To activate this function, (a) Turn the ignition switch 

off.  (b) Within 10 seconds of step (a), depress and hold the brake pedal, while pressing the key 

icon transmitter button 2 times. (c) the unit will emit 2 chirps, the transmitter will beep and the 

start timer icon on the display will remain on. The vehicle will start at the set time.  To toggle this 

feature off, press the lock buttons simultaneously until a beep is heard and the 24 hr 

timer turns off.

TEMPERATURE START MODE

This icon will appear when the temp start mode is activated.  The vehicle will start one 

time automatically when the temperature reaches 0*.

 

WARNING! Be certain vehicle is outside before activating this mode.

 To toggle this feature on of off, from the Locked/Armed mode, press the Option and Lock but-

tons simultaneously.  (Available on certain remote start models only).

Throughout this manual you will find screen shots where they apply if using the two way trans

-

mitter.  If using the one way transmitter while the two way transmitter is within range of the 

vehicle, the two way transmitter will update it’s screen.

VEHICLE PAGE

This icon will be displayed when the push-button on the receiver is activated with the 

ignition switch off.  Typically used when you someone wanting to get your attention with 

access to the vehicle can page you from the car.

S

24

Содержание PE2RELCD













Отзывы: