128-9447
24 of 28
24
SELECT
ABLE FEA
TURES
The selectable features of this unit can be set manually as explained above, or online by using our web link.
The
Accessory VE-PROG kit will include the nec
-
essary cables to connect to your computer along with the web access information and application required to take advantage of this feature. Factory default settings are indicated by
BOLD
text below
.
Note
:
The
method of
manual override can either be selected to
operate from
the
valet switch or operate by
custom
code.
Custom Code programming is
found
in the owners guide. Be certain to place a check mark indicating the method used in the box located on the last page of the owner's manual.
NOTE:
Manual programming Keyless Entry Models with no horn output will Flash the Parking Lights instead of chirp where chirp is indicated.
Also, No data will be indicated if a feature is not available for a particular model.
The unit will enter the feature but no selection will be available.
RF Programmable Feature Bank 1 Is For T
ransmitter Programming See T
ransmitter Programming Guide.
Programmable Features Bank 2 Is
Alarm Selectable Features:
Feature Selection
1 Chirp
2 Chirps
3 Chirps
4 Chirps
5 Chirps
6 Chirps
1st DoorL/UL
500
mS
3.5 Sec.
500mS L, Dbl. U/L
Dbl L, 500mS UL
Dbl L, Dbl UL
500mS/350mS ul
2nd Accy
Lock
Auto Lock On
Auto Lock Off
3rd Accy
. UL
Auto UL
Dr
.
Auto UL
All
Auto UL
Off
4th Headlights
Not A
vailable
5th Passive Locks
Not A
vailable
6th
Pass/Act
Arm
Not A
vailable
7th Siren/Horn
Not A
vailable
8th Horn Chirp
10mS
16mS
30mS
40mS
50mS
9th O/R Method
Not A
vailable
10th 2 Step U/L
On
Off
11th Chp Del
Tx
On
Off
12th
Trigger
Circuits
Not A
vailable
13th L/UL
Poll
Not A
vailable
14th
Aux Ch 5 Sel
Pulse
Push & Hold
10 Sec
20 Sec
Latch On/Of
f
Hold 3/S For O/P
15th
Aux Ch 6 Sel
Pulse
Push & Hold
10 Sec
20 Sec
Latch On/Of
f
Hold 3/S For O/P
16th
Aux Ch 7 Sel
Pulse
Push & Hold
10 Sec
20 Sec
Latch On/Of
f
Hold 3/S For O/P
17th T
rigger
Delay
Not A
vailable
18th Data Port Select
DBI Protocol
ADS Protocol
If Programming via PC while connected to + 12 VDC you must manually enter the programming mode as shown below
.:
Turn the ignition on Press and release valet switch 3 times
turn ignition off then on, off then on, off then on, off then on to enter web/on-line feature selection Bank 5.
Siren chirps 5 times indicating access to feature program mode. Launch the aapplication on your PC,,Connect the module via the USB to DBI har
-
ness and follow program prompts.
