Prestige 420 Скачать руководство пользователя

Страница: 36 / 100

- 36 -

Operation:

I- Turn on the battery switches.

II- Switch on the bilge pump (Ref 4).

If the boat is equipped with an automatic bilge pump, the switch has an always-on position.

Bilge pump no. 3 is connected directly to the batteries.

Bilge pump maintenance

Please refer to the manufacturer's notes on the instructions for checking and maintaining the
bilge pumps.

- The bilge pumps system is not designed to deal with water coming in
through breaches in the hull.

- Keep the water level in the bilges to the minimum.

- Never store anything right at the bottom of the boat: Allow bilge water to flow
freely down to the lowest point of the boat.

SAFETY PRECAUTIONS

- Check that each bilge pump is working at regular intervals.

- Clear the bilge pump points or strainers of any debris that could clog them.

- If the watertight partitions which seal off the fore and aft points are fitted with valves they
must be closed at all times and only opened to drain water into the main bilge.

Содержание 420





































































































Результаты поиска

Содержание 420

Отзывы:

Похожие инструкции для 420

Бренды по названию

Популярные бренды

Prestige 420, Руководство пользователя

Результаты поиска

Содержание 420

Отзывы:

Похожие инструкции для 420

Бренды по названию

Популярные бренды