Page 12
Repeat the sealing operation as before.
At the end of the operation ensure the ON/OFF switch is in the off position.
Once the sealing is finished check the seal, tugging lightly on the flaps of the
packet.
If the operator has left the pouch sealer on and does not use if for at least 30
minutes, it will go into ECO-mode; the sealing bar switches off to prevent damage
and energy waste. When it is in this mode the LED will flash green at a reduced
frequency. To return it to normal mode, operate the lever to reactivate the
heating.
The pouch sealer checks that the sealing bar is working properly. If it
determines it is not, the power supply to the bar is cut off and the red LED
starts flashing. The buzzer will also sound for 3 seconds.
Содержание Pouch Sealer
Страница 1: ...Instructions for use Pouch Sealer...
