Grease Guns
PNEUMA
xx
Operating Instructions
4
Issue 12.02.14
2.3
Dangers when utilizing the Grease Gun
Attention!
Overpressure may cause bursting of the grease gun head and its accessories
Do not use force when operating the hand lever or the manual grease supply pump.
Do not use extension tubes or other utilities.
Do not exceed the operating/supply pressures indicated in chapter 1.3.
We recommend the use of original accessories according to DIN 1283 only.
Attention!
Overpressure at the lubrication point may destroy the grease nipple and perhaps even the
bearings or the machine itself.
Do not exceed the operating/supply pressures indicated in chapter 1.3.
Please pay attention to the maintenance and service advices of the manufacturer of your
machine.
Attention!
Defective accessories may cause personal harm or material-damage
High-pressure hoses may not be bent, twisted or stretched.
Accessories will have to be checked for abrasion, cracks or further damages permanently.
Defective accessories will have to be exchanged immediately.
Please see the data in the German Regulation ZH 1/A45.4.2 or the DIN 20066 part 5.3.2. for
the duration of operation.
3. Assembly
The grease gun
PNEUMA
xx will be delivered completely assembled.
Accessories will have to be mounted depending on the version used.
Note
When assembling the system, cleanliness and an exact connection of the accessories to the
grease gun head is required.
Please use suitable sealing material (e.g. Teflon film), only.
