17
en
The models with safety tray
All lowstart changing tables, except
foldable models, are equipped with a
safety tray.
If the safety tray
1
comes into
contact with an object when the
table is being lowered, the motor
stops immediately and the table
will rise 3-4 cm to reduce the risk
of pinching/compression injuries
under the table. The table might
need resetting before it can be used
again. See „Resetting“.
1
Resetting
①
Make sure that the safety tray is not
activated. Lower the changing table all
the way down to its starting position
using the down button.
②
Release the down button, and after 3-4
sec. press it in again until you hear a
slight click after approx. 10 sec.
③
Release the lowering button and then
raise the changing table to its highest
position. You will hear another click.
④
Lower the changing table a couple of
centimetres/about one inch.
⑤
Then raise it again to its highest
position. You will hear another click.
The changing table is now reset.
The changing table should also be reset if there has been an
interruption of the power supply.
Содержание R8661
Страница 3: ...3 R8661 R8961 R8662 R8962 R8663 R8963 REF ...
Страница 4: ...4 R8670 R8671 R8971 R8672 R8972 R8673 R8682 R8684 R8683 R8685 REF ...
Страница 6: ...6 R8690 R8694 R8698 RB1922 R8708 R8700 R8701 R0702 R8703 R8704 R0705 R8710 R8709 V8585 ...
Страница 137: ...中 文 137 检查墙轨 并按需要拧紧 润滑移动部件 特别是滑轨 检查控制箱 的所有电气连接 检查滑轮 是否磨损 润滑链条 重新装上装置外壳 然后拧紧固定螺丝 接通总电源 抬起顶盖 2 2 2 2 5 4 1 3 ...