8
When the lid is opened, the red diode in the
console tube panel flashes twice to indicate
if there is sufficient power.
When the diode no longer flashes it is time
to change the batteries.
You need to use 2 x AAA alkaline batteries
(IR3-1.5V).
To change the batteries, see section on
battery replacement.
Used batteries should be disposed at
authorised collection sites.
x 2
Battery change indicator
14
- visit www.pressalitseats.com for
step-by-step instructions.
Lower seat and lid to horizontal position.
Raise the seat to an angle of 15
degrees. Press the two buttons and remove
the seat.
Replacing the batteries
Use the key, which you will find on
the backside of this manual. Slide the key
through the oblong hole at the right end of
the console tube and turn the panel 90°.
15°
90°
Pull out the locking module using the key.
17
16
15
