7
35
5-7°
!
Mount the seat by pressing the buttons and
placing the seat over the console tube.
Release the buttons.
Open and close the seat and lid until the
buttons click into place.
15°
11
Mounting instructions,
top mounted hinge
4
6
5
7
9
8
1
3
2
10
12
11
A
B
13
12
If the seat and lid tend to fall over in open
position replace the plain rubber disc with
one or two of the enclosed oblique washers
in each side.
Pay attention to the arrow’s direction.
Check that the distance between top of the
lid and wall is minimum 35 mm.
See the mounting instructions in picture 13.
If the seat and lid tend to fall over in open
position replace the plain rubber disc with
one of the enclosed oblique washers in each
side (see picture 12).
When placing the washer under the hinge,
please be sure to make the arrow face down.
Also see quickguide