background image

OVERVIEW 

 

1. 2 FEATURES (continued) 

 

 

Eight Dynamic Noise Gates. 

 
 

Each channel of your ACP-88 has a separate dynamic noise gate that can be used to 

Gate an entire drum kit, clean up a noisy tape machine, isolate an instrument or 
separate a vocal from background noise. Each noise 

Gate 

provides control over 

Attack

Threshold

Release 

and 

Gate  close  Range

. The Gate close range can be useful in 

creating a more natural sounding blend or mix when gating many instruments 
at once. 
 

 

Comprehensive Channel Linking.  

 

Using the 

Link 

function allows you to combine any combination of ACP-88 channels 

effectively forming a 

subgroup

. When linked, all processors follow the setting of the 

Master 

processor which is 

always 

the processor furthest to the 

Left 

in a 

Link 

group. For 

example, you could 

Link 

together channels 

and 

to form a 

Stereo pair

, channels 

3

and 

to form a 

subgroup 

of processors, while channels 

1

and 

remain available for 

independent 

applications such as 

compression

limiting, 

or 

gating 

as the situation 

dictates. 

 

 

Separate Bypass and Gain for Every Channel.  

 

Each Channel has a separate 

Bypass 

for auditioning a signal ‘

before and after

’ 

processing with the compressor, limiter, or the 

Gate 

and a 

Gain 

control to make up any 

loss in signal level resulting from the amount of compression being applied. 
 

 

Compressor Sidechain Jack on Every Channel.  

 

Each channel of your ACP-88 was designed with a special jack for 

spectral processing

compression keying 

and 

ducking 

applications. 

Sidechaining 

is useful for removing 

annoying sibilance from vocal tracks (

de-essing

) or automatically ducking tracks behind 

a narrator for ‘auto mixing” a service, broadcast or performance. When multiple channels 
are 

Linked 

together, the 

Send 

of the 

Sidechain 

jack of the 

Master 

channel contains a 

mix 

of all the channels in the 

Link

: a very cool feature allowing control over multiple 

channels of processing with one 

Sidechain  send/return

. (See the section on 

Sidechaining 

for application notes.)

 

Содержание ACP88

























Отзывы: