DUO TESTER II
GLASS (2)
CAL (1)
Press and hold the “DISPLAY” button and wait until the
displayed number remains stable (about 2 seconds)
(Fig. 2.6).
Note: The 7-simulant gemstones set is used with the aid
of the RI chart at the back of the unit for calibration and
functional testing of the Reflectivity sensor.
*7-simulant gemstones set is sold separately as an
optional item.
Tips for using your Presidium Duo Tester II
If the tester is being used for the first time, or if the tester
has not been used for a week, it is advisable to clean the
probe tip using a piece of paper to attain consistent and
accurate reading. Rub the tip gently across the paper
surface before testing.
The probe tip must be placed at a right angle or
perpendicular to the facet of gemstone for an accurate
reading
Tests should be conducted on the table of the gemstone.
In the event of any doubt, kindly test on the girdle of the
gemstones instead.
When mounted stones are not recessed in their setting,
their reflectivity can be measured. Use a black plastic box
(e.g., photographic film container) as an alternative to the
recessed cylinder.
To achieve optimum accuracy for tests involving very small
gemstones (10 points and below), it is important to allow
the gemstone to cool down before subsequent tests.
It is advisable to take multiple readings regarding the test
results indicated.
Fig. 2.6
