10
WX
MODE
Press and hold the
SCAN
key for 1 second to activate the
SCAN
function (all the
WEATHER channels) in an increasing way.
“SCAN”
is displayed. The scanning stops
as soon as there is a busy channel. The scanning automatically starts 3 seconds after
the end of the transmission and no key is activated during 3 s. The scanning starts
again in an increasing way by turning the rotary knob to the right, or in a decreasing
way by turning the rotary knob to the left.
Note:
If the
ALERT
function is activated, the SIREN tone sounds
(see §
ALERT
page
8)
when a tone is detected in the
selected
WEATHER channel only. Use first
SCAN
function in
WX
mode for detect tones in
all
the WEATHER channels.
A new long press on
SCAN
disables the
SCAN
function.
•KEY BP
(
•F
+ short press)
Beep on changing the channel, keys etc...
Activate the
KEY BP
function by pressing 1 time the
•F
key and short press the
•KEY
BP
key. A beep sounds.
“BP”
is displayed. Press again 1 time the
•F
key and short
press the
•KEY
BP
key to deactivate the function.
“BP”
disappears.
10) MEM ~ STORE
Allows to memorize an channel with following parameters: NB (ON/OFF)HI-CUT (ON/
OFF).
MEM
(short press)
To
recall
a
memory:
- Short press
MEM
key,
“MEM”
appears on the display. If the
KEY BP
function is activated
a beep sounds. The memorized channel is activated. Short press again
MEM
to go
back to previous operating channel.
STORE
(long press)
To
memorize:
Select the channel to be memorized.
- Press the
MEM
key for 1 second;
“MEM”
appears in the display. If the
KEY BP
function
is activated a long beep confirms the saving.
Only one channel can be memorized. Store a second channel will delete the previous
from memory.
To
delete
a
memory:
- Switch off the transceiver.
- Keep the
MEM
key pressed and switch on the transceiver.
- The memory is deleted.
11) CB/PA ~ LOCK ~ •Colour
CB/PA
(short press)
Short press the
CB/PA
key to alternate between
CB
and
PA
mode.
PA
MODE
An external loud speaker can be connected to the unit by the PA jack plug situated
on the back panel PA.SP. (
D
). The
PA
volume is regulated by
VOL
knob (
1
).
“PA”
is
displayed.
ROGER
,
SCAN
,
MEM
,
VOX
are not allowed in
PA
mode. If the user set
ON
PA
mode
while
SCAN
function, instant channel
9/19
mode or
WX
mode, these are canceled.
The CB message received will be directed towards the PA speaker and be amplified.
The message transmitted into the microphone will be directed towards the PA speaker
and be amplified.
“PAon”
is displayed, Meter numbers indicate signal level.
LOCK
(long press)
Allows to lock all the keys on the front panel and the rotary knob. An error beep
sounds when a key is used and the
LOCK
function is activated. A long press on
LOCK
activates/deactivates the
LOCK
function. appears on the display when
the function is activated.
Transmission (microphone or vox) and reception remain active.
English
